Sharp XV-Z200U Manuale Utente
-20
Optional
accessory
accessory
DVI cable
Type: AN-C3DV
Type: AN-C3DV
(9'10'' (3.0 m))
To DIGITAL INPUT
terminal
terminal
DIGITAL INPUT
TYPE switch
TYPE switch
DVD player or
DTV decoder
DTV decoder
To DVI digital output terminal
DVI cable
(sold separately)
(sold separately)
-20
Connecting to Video
Equipment with the DVI
Output Terminal Using
a DVI Cable (DIGITAL
INPUT)
Equipment with the DVI
Output Terminal Using
a DVI Cable (DIGITAL
INPUT)
Use the DVI cable when connecting video
equipment with the DVI output terminal such
as DVD players and DTV decoders to DIGITAL
INPUT terminal.
equipment with the DVI output terminal such
as DVD players and DTV decoders to DIGITAL
INPUT terminal.
1
Slide the “DIGITAL INPUT
TYPE” switch on the back ter-
minal board to “VIDEO”.
TYPE” switch on the back ter-
minal board to “VIDEO”.
2
Connect the DVI cable to the
DIGITAL INPUT terminal.
DIGITAL INPUT terminal.
3
Connect the other end to the
corresponding terminal on the
DVD player or DTV decoder.
corresponding terminal on the
DVD player or DTV decoder.
• Secure the connectors by tightening the
thumbscrews.
Note
• Select DIGITAL INPUT mode when con-
necting to video equipment with the digital
output terminal. (See page 31.)
output terminal. (See page 31.)
• Make sure to turn both the projector and
the video equipment off before switching
the “DIGITAL INPUT TYPE” switch and
connecting.
the “DIGITAL INPUT TYPE” switch and
connecting.
Connecting the Projector to Other Devices
XV_Z200U_E_p13_28.p65
03.10.28, 1:53 PM
20