Elmo CRP-26 Manuale Utente



 •

Auto Keystone corrects vertical distortion only, 

not correct horizontal distortion.

 • The Auto Keystone function cannot work when

the 

Ceiling feature is set On in the Setting menu 

(p.49).

 • Perfect correction of the image distortion cannot

be ensured with the Auto setup function. If the 

distortion is not corrected properly by pressing the 

AUTO SETUP or the AUTO SET button, adjust 

manually by pressing the KEYSTONE button on 

the remote control or selecting 

Keystone in the 

Setting menu (pp.23, 45).

 •

Fine sync, Total dots, Horizontal and Vertical 

position of some computers cannot be fully 

adjusted with the Auto PC Adjustment function. 

When the image is not provided properly with 

this operation, manual adjustments are required 

(pp.30-31).

This function detects the input signal automatically. When 

a signal is found, the search will stop. Use the Point 

▲▼

 

buttons to select one of the following options.

Off ........... Input search will not work.

On1.......... Input search works under the following situation.

 

– When pressing the AUTO SETUP button on 

the top control.

 

– When  pressing  the AUTO  SET  button  on  the 

remote control.

On2.......... Input search works under the following situation.

 

– When turning on the projector by pressing the 

ON/STAND-BY button on the top control or the 

remote control.

 

– When  pressing  the AUTO  SET  button  on  the 

remote control.

 

– When  pressing  the AUTO  SETUP  button  on 

the top control.

 

–  When the current input signal is cut off.*

*

 

If the No show or Freeze function is active, cancel it to 

activate the Input search. It is also unavailable when 

On-Screen menu is displayed.

Auto PC adj.
On. . . . . . . .Enables Auto  PC Adjustment  when  pressing        

the AUTO SET button on the remote control or 

the AUTO SETUP button on the top control.

Off  . . . . . . .Disables Auto PC Adjustment.
 Auto Keystone 

Auto  . . . . . Always works and corrects keystone distortion 

according to the projector's tilt.

Manual . . . .Works only when pressing the AUTO SETUP 

button on the top control or the AUTO SET 

button on the remote control.

Off  . . . . . . .Disables Auto Keystone.



 

• While

Input search is set to On1 or On2, the status of Input 

and Lamp are displayed every time the signal is switched.

 • Only the last selected input source can be detected.
 • During

Input search is in progress, If the MENU button or 

the ON/STAND-BY button is pressed, 

Input search will stop. 

If the COMPUTER 1/2 button or VIDEO or COMPONENT or 
S-VIDEO button is pressed, 

Input search will stop and go 

back to the button's input signal. 

 •

Input search, Auto PC adj. and Auto Keystone cannot be 

set 

Off at the same time. 

This function enables Input search, Auto Keystone correction 

and Auto PC adjustment by pressing the AUTO SETUP button 

on the top control or the AUTO SET button on the remote 

control. Settings for those functions can be altered as follows: