Epson EB-1760W Manuale Utente

Submenu

Function

Trap IP Address
1/Trap IP Ad‐
dress 2

You can register up to two IP addresses for the SNMP trap
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)

AMX Device Dis‐
covery

When the projector is connected to a network, set this to On
when you want to allow the projector to be detected by AMX
Device Discovery

. Set this to Off if you are not connected to an

environment controlled by a controller from AMX or AMX
Device Discovery.

Resets  all  of  the  network  settings.

Submenu

Function

Reset network
settings.

To reset all of the Network settings, select Yes.