Epson EB-520 Manuale Utente

Type  of  security

When  the  optional  Wireless  LAN  unit  is  installed  and  being  used  in
Advanced  connection  mode,  it  is  strongly  recommended  that  you  set
security.

WPA  is  an  encryption  standard  that  improves  the  security  for  wireless
networks.  The  projector  supports  TKIP  and  AES  encryption  methods.

WPA  also  includes  user  authentication  functions.  WPA  authentication
provides  two  methods:  using  an  authentication  server,  or  authenticating
between  a  computer  and  an  access  point  without  using  a  server.  This
projector  supports  the  latter  method,  without  a  server.

a

For  setting  details,  follow  the  instructions  from  your  network
administrator.

Submenu

Function

IP Settings

You can make settings related to the following addresses.
DHCP

: Set to On to configure the network using DHCP. If this

is set to On, you cannot set any more addresses.
IP Address

: You can input the IP address assigned to the

projector. You can input a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask

: You can input the subnet mask for the projector.

You can input a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address

: You can input the IP address for the gateway

for the projector. You can input a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)