Epson EB-1975W Manuale Utente
You can control the projector from an external device using ESC/VP21.
Related Links
ESC/VP21 Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
output and a ":" is returned.
The following commands are available.
Item
Command
Power ON/OFF
On
PWR ON
Off
PWR OFF
Signal selection
Computer1
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
Computer2
Auto
SOURCE 2F
RGB
SOURCE 21
Component
SOURCE 24
HDMI1/MHL
SOURCE 30
HDMI2
SOURCE A0
Video
SOURCE 41
Item
Command
USB Display
SOURCE 51
USB
SOURCE 52
LAN
SOURCE 53
Screen Mirroring
SOURCE 56
A/V Mute On/
Off
Off
On
MUTE ON
Off
MUTE OFF
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
transmit.
Contact Epson for more details.
Related Links
Cable Layouts
Serial connection
• Connector shape: D-Sub 9-pin (male)
• Projector input port name: RS-232C
• Cable type: Crossover (null modem) cable
In the following illustration, the projector side is shown on the left, and the
computer side on the right:
• Projector input port name: RS-232C
• Cable type: Crossover (null modem) cable
In the following illustration, the projector side is shown on the left, and the
computer side on the right:
Using ESC/VP21 Commands
122