Epson EB-1975W Manuale Utente

• Strong fluorescent lighting, direct sunlight, or infrared device signals

may be interfering with the projector's remote receivers. Dim the lights
or move the projector away from the sun or interfering equipment.

• If available, turn off one of the remote receivers or check if all the

remote receivers were turned off in the Remote Receiver setting in the
projector's Settings menu.

• If the Remote Receiver setting is disabled, hold down the [Menu]

button on the remote control for at least 15 seconds to reset the setting
to its default.

• If you assigned an ID number to the remote control to operate multiple

projectors, you may need to check or change the ID setting (this feature
is not available with all projectors).

• If you lose the remote control, you can order another one from Epson.

p.180

• "Remote Control Operation"

p.31

• "Selecting the Projector You want to Operate"

p.90

• "Replacing the Remote Control Batteries"

p.167

• "Projector Feature Settings - Settings Menu"

p.137

Solutions to Password Problems

If you cannot enter or remember a password, try the following solutions:

• You may have turned on password protection without first setting a

password. Try entering 0000 using the remote control.

• If you have entered an incorrect password too many times and see a

message  displaying  a  request  code,  write  down  the  code  and  contact
Epson  for  help.  Provide  the  request  code  and  proof  of  ownership  for
assistance  in  unlocking  the  projector.

• If you lose the remote control you cannot enter a password. Order a

new one from Epson.

p.180

Solution When "The Battery that Saves Your Clock
Settings is Running Low" Message Appears

If the message "The battery that saves your clock settings is running low." is
displayed, contact Epson for help.

p.180

Solving Projector or Remote Control Operation Problems

181