Manualsbrain.com
  1. Manuali
  2. Marche
  3. Epson
  4. 7850p
  5. Manuale Utente

Epson 7850p Manuale Utente

Scarica
Pagina di 224
Displaying and Adjusting the Image
29
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended 
procedure to shut it down. This extends the life of the lamp and 
protects the projector from possible overheating. 
1. Turn off any equipment plugged into the projector. 
2. To turn off the projector, press the red P
Power 
button on the 
projector or remote control. 
You see a confirmation message. (If you don’t want to turn it off, 
press any other button.)
3. Press the 
Power
 button again. The power light flashes orange for 
about 40 seconds as the projector cools down. After the projector 
has cooled, the orange light stays on and the exhaust fan shuts off.
If you want to turn the projector on again, wait until the orange 
light stops flashing. Then press the 
Power
 button.
4. If you extended the adjustable front foot, press up on the blue 
foot release lever to retract it.
5. Replace the lens cap and unplug the power cord.
6. If you’re using a remote control, set its 
ON/OFF
 switch to 
OFF
. 
note
When the projector has not 
received any input signals 
for 30 minutes, it 
automatically turns off the 
projector lamp and enters 
“sleep mode.” This conserves 
electricity, cools the 
projector, and extends the 
life of the lamp. If you want 
to start projecting again, 
press the 
Power
 button. If 
you are done using the 
projector, unplug the power 
cord. To turn off sleep mode, 
see page 139.
Power button
Power OFF?
Power OFF?
Yes 
Yes : 
: Press         button
Press         button
No 
No  : 
: Press any other button
Press any other button
caution
To avoid damaging the 
projector or lamp, never 
unplug the power cord when 
the power light is green or 
flashing orange.