Epson EB-G5600 Manuale Utente

When  this  is  set,  you  receive  an  e-mail  notification  if  a  problem  or  warning  occurs  in  the  projector.  

s

  "Reading   Problem   Mail   Notification  Function"

Sub Menu

Function

Mail Notification

You can set whether or not (On/Off) to be notified by e-mail.

SMTP Server

You can input the IP address

 for the SMTP server for the projector.

You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

Port Number

You can input the port number for the SMTP server. The default value is 25. You can input numbers between 1 to 65535.

Email Address 1/Email
Address 2/Email Address 3

You can input the e-mail address of the destination to send the notification e-mail to. You can register up to three destinations. You can enter up to 64
single-byte alphanumeric characters for the e-mail addresses. You cannot enter more than 32 characters on the configuration menu. When setting from
Web Control, you can enter more than 32 characters. s 

Setting a Notification Event

You can select the problems or warnings to be notified about by e-mail. When the selected problem or warning occurs in the projector, an e-mail is sent
to the specified Email Address notifying that a problem or warning has occurred. You can select multiple items from the displayed items.