Epson EB-G5600 Manuale Utente
Interpreting Event IDs (EB-G5950/G5650W only)
Check the event ID and perform the remedy given below. If the problem cannot be solved, contact the network administrator or one of the following contact
addresses.
addresses.
s
Event ID
Cause
Remedy
0432
0435
0435
Failed to startup EasyMP Network Projection.
Restart the projector.
0434
0481
0482
0485
0481
0482
0485
Network communication is unstable.
Check the status of network communications. Wait for a while and then try connecting again.
0433
An image that was transferred cannot be reproduced.
Restart EasyMP Network Projection.
0484
Communications was cut off from the computer.
04FE
EasyMP Network Projection ended unexpectedly.
Check the status of network communications. Restart the projector.
04FF
A system error occurred in the projector.
Restart the projector.
0891
The same SSID access point cannot be found.
Set the computer, the access point, and the projector to the same SSID.
0892
The WPA and WPA2 authentication methods are not the same.
Check the setting of wireless LAN security to see if it is correct. s Network Menu - Security
Menu
Menu
0893
The WEP, TKIP, and AES encoding methods are not the same.
0894
Communications was cut off because a connection was made to the
wrong access point.
wrong access point.
Check with the network administrator and follow their instructions.
0898
Failed to obtain the DHCP.
Check the DHCP server to see if it is operating correctly and check the LAN cable to see if it is
connected correctly. Turn off DHCP if it is not being used. s Network Menu - Wireless LAN
Menu
connected correctly. Turn off DHCP if it is not being used. s Network Menu - Wireless LAN
Menu
, Wired LAN Menu
0899
Other connection errors
If the problem cannot be solved by restarting the projector or EasyMP Network Projection, contact
one of the following contact addresses. s
one of the following contact addresses. s
Problem Solving
99