Epson S5 Series/77c Manuale Utente

To focus and adjust the image, see page 37. If a projected image fails 
to appear, see “What To Do If You See a Blank Screen” on page 34.

When you’re done with your presentation, shut down the projector as 
described on page 42.

Selecting the image source lets you switch between images input from 
different pieces of equipment connected to the projector (such as a 
computer and DVD player). If you don’t see the image you want, 
press the 

Source Search

 button on the remote control or projector 

until the correct device image is projected. 

If a projected image fails to appear, see the next section for help.

Once you see your image, turn to page 37 for instructions on focusing 
and making other image adjustments. 

If you see a blank screen or a blue screen with the message 

No Signal 

after turning on your computer or video source, try the following:

■

Make sure the cables are connected correctly, as described in 
Chapter 1.

■

Make sure the power light is green and not flashing and the 

A/V 

Mute

 slide is open. 

■

Make sure you’ve selected the correct image source; see the 
previous section. Allow a few seconds for the projector to sync up 
after pressing the button. 

Projector control panel

Remote control