Epson S5 Series/77c Manuale Utente

7. Gently insert the new lamp along the guide rail. If it doesn’t fit 

easily, make sure it’s facing the correct way. Push the lamp down 
firmly where the label 

PUSH

 appears.

8. Once the lamp is fully inserted, tighten its screws.

9. Lower the lamp cover into place. (The opening should be almost 

covered, and the top of the cover should be flush with the top of 
the projector.) Then slide the cover closed and tighten the screw.

10. Reset the lamp timer as described in the next section.

You must reset the lamp timer after replacing the lamp to clear the 

Replace the Lamp 

warning message. Follow these steps:

1. Connect the power cable and turn on the projector.

2. Press the 

Menu

 button on the remote control or projector and 

select the 

Reset

 menu. Then press 

Enter

. You see the following: