Epson S5 Series/77c Manuale Utente

■

Make sure you are within 20 feet of the projector, and within 
range of the projector’s front or back sensor (approximately 30° to 
the left or right and 15° above or below).

■

If a button on the remote control is held for more than 30 
seconds, the remote enters sleep mode. Press another button for 
normal operation. 

■

The remote control batteries may not be installed correctly or may 
be low on power. Replace the batteries as described on page 49.

■

Dim the room lights and turn off any fluorescent lights. Make 
sure the projector is not in direct sunlight. Strong lighting, 
especially fluorescent lights, may affect the projector’s infrared 
receivers.

■

Turn off any nearby equipment that emits infrared energy, such 
as a radiant room heater.

You need the remote control to access many projector features. If you 
have lost it, you can order another from Epson. See page 94 for 
details.

■

Make sure the USB mouse cable is securely connected to both 
your computer’s USB port and the projector’s USB port. For 
details, see page 21.

■

Your computer must be connected to the 

Computer

(Component Video)

 port on the projector.