Epson EMP-X3 Manuale Utente

Automatic setup detects analogue RGB signals coming from a connected 
computer, and automatically adjusts these signals so that the optimum 
images can be obtained.
Automatic setup involves adjustment of the following three items:

, Position and 

Sync (synchronisation)g

.

If "Auto Setup" in the "Signal" menu is set to "Off", automatic setup is not 
carried out. In this case, press the [Auto] button on the remote control or 
the [Enter] button on the projector's control panel to make the adjustment 
while computer or RGB video images are being projected.

If vertical stripes appear in the projected 
computer or RGB video images, and this cannot 
be fixed using automatic setup, you will need to 
adjust the 

 manually using the 

following procedure.

A

Select "Signal" from the configuration menu, and 
then select "Tracking".
For details on this operation, refer to 

"

. s

Check the buttons you can use and the operations they perform 
in the guide at the bottom of the screen.

depending on the type of computer or RGB video 
signals being input. In such cases, use the 
configuration menu commands to adjust the tracking 
and sync settings manually. s

Using the remote control

Using the control panel

Using the remote control

Using the control panel