Epson EMP-X3 Manuale Utente
64
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
PROCEDURE
A
Project the image you would like to use as the user’s
logo, and then display the configuration menu.
logo, and then display the configuration menu.
B
Select "Extended" from the configuration menu, and
then select "User’s Logo".
For details on this operation, refer to
then select "User’s Logo".
For details on this operation, refer to
"
. s
Check which buttons on the remote control or the control panel
you can use, and the operations they perform, in the guide at the
bottom of the screen.
you can use, and the operations they perform, in the guide at the
bottom of the screen.
When a user's logo is recorded, the previous user's logo
will be erased.
will be erased.
Using the remote control
Using the control panel
• If the "User’s Logo Protect" function of "Password
Protect" is set to "On", a message is displayed and the
user's logo can not be recorded. To record a user's logo,
set "User’s Logo Protect" to "Off" first. s
user's logo can not be recorded. To record a user's logo,
set "User’s Logo Protect" to "Off" first. s
• If keystone correction, E-Zoom and so on, have been
carried out, the function currently being performed is
cancelled when the "User’s Logo" menu is selected.
cancelled when the "User’s Logo" menu is selected.