Epson EB-Z8000WU Manuale Utente

Items  that  can  be  set  vary  depending  on  the  image  signal  currently  being  projected  as  shown  in  the  following  screen  shots.  Setting  details  are  saved  for
each  image  signal.

Analog RGB

Digital RGB/

Digital Component Video

Analog Component Video

Composite video

/S-Video

Sub Menu

Function

Auto Setup

You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes.
s

 

Auto Setup is not available when Resolution is set to Customized 1 or Customized 2.

Resolution

: The resolution of the input signal is automatically identified.

, Normal: If the images cannot be projected correctly when Auto is set, set this menu. Set to Wide depending on the connected computer for

wide screens, or set to Normal for 4:3 or 5:4 screens.
Manual

: You can specify the resolution. This is ideal when connected computer is fixed.

Tracking

You can adjust computer images when vertical stripes appear in the images. s 

Sync.

You can adjust computer images when flickering, fuzziness, or interference appear in the images. s 

Position

You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.

(Component Video can only be adjusted when 480i/576i/1080i signals are being input. This cannot be set when a digital RGB signal is input.)
Off

: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.

: This is ideal for viewing general video images.

: By automatically converting movie films, CG, animated images, and so on recorded in 24/30 frames to the optimum progressive signal

via 2-3 pull-down, it is possible to recreate the natural feel of the original image.