EIKI LC-WB42N Manuale Utente

Select Digital zoom +. The On-Screen Menu disappears and
D . zoom +

appears. Press the SELECT button to expand the

image size. Use the Point

▲▼◄►

buttons to pan the image.

The Panning function can work only when the image is larger

than the screen size.

A  projected  image  can  be  also  expanded  by  pressing  the

D.ZOOM

+

button on the remote control.

To exit the Digital zoom +/– mode, press any button except

the D.ZOOM

+/-

buttons, SELECT and Point buttons.

Select Digital zoom -. The On-Screen Menu disappears

and D . zoom – appears. Press the SELECT button to

compress image size.

The projected image can be also compressed by pressing

the D.ZOOM

-

button on the remote control.

To return to the previous screen size, select a screen size

from  the  Screen  Size Adjustment  Menu  or  select  an  input

source  from  the  Input  Source  Selection  Menu  (see  pages

30-31) again or adjust the screen size with the D.ZOOM

+/-

buttons.

Note:
 • The panning function may not operate properly if

the stored Mode in the PC adjust Menu is used

(p.35).

• The minimum compression ratio is limited

depending on the input signal, when the

Keystone function is working or when the

custom is selected for the screen size.

 • True, Full and Digital zoom +/– cannot be

selected when 480i, 575i, 480p or 575p is

selected in the PC System Menu (p.32).

 • Digital zoom +/- cannot be selected when Full

or True is selected.

• When Custom is selected, the Digital zoom -

function is disabled.

Adjust  the  screen  scale  and  position  manually  with  this

function.

Press the Point ►button at Custom and the Custom is

displayed on the screen, you can use the Point ▲▼ buttons

to choose the item you want to adjust.
 Scale H/V ..........  Adjust the Horizontal/Vertical screen

scale.

 H&V ...................  When set to On, the aspect ratio is fixed.

appears dimmed and becomes

unavailable. Adjust  Scale  H,  then  the

screen  scale  is  automatically  modified

based on the aspect ratio.

 Position H/V .....  Adjust  the  Horizontal/Vertical  screen

position.

 Common ...........  Save the adjusted scale to all the inputs.

Press the SELECT button at Common to

display  a  confirmation  box. To  save  the

scale, press the SELECT button at yes.

When  Custom  is  selected,  the  saved

scale is used.

 Reset .................  Reset  the  all  adjusted  values.  Press

the  SELECT  button  at  Reset  to  display

a  confirmation  box. To  reset,  press  the

SELECT button at yes.

Note:

 • When no signal is detected, Normal is set

automatically and the Aspect dialog box

disappears.

 • The adjustable range for Scale H/V and

is limited depending on the input

signal.