Garmin 821P Manuale Utente

3. Connect one end of the cable to the projector’s 

Computer1/Component Video1 

or the 

Computer2/Component Video2

 port. If you are going to 

connect your computer monitor to the projector for simultaneous 
display, use the 

Computer1/Component Video1

 port.

4. Connect the other end of the cable to your computer’s video-out 

or monitor port. 

If you’re using a PowerBook or iBook and you can’t connect the 
cable, you may need to use the Macintosh desktop adapter as 
shown below (available from Epson; see page 12).

To use the adapter, remove its cover as 
shown and set its DIP switches according 
to the resolution you want to use, such as 
16-inch mode. See your Macintosh 
documentation for instructions.

Replace the cover and connect the 
adapter to the free end of the computer 
video cable. Then plug the cable (with 
the adapter) into the video port on your 
Macintosh.

5. Tighten the screws on the connectors.

If you want to view the display simultaneously on your computer 
monitor and the projector screen, see “Connecting an External 
Monitor” on page 20.