Garmin EMP-X3 Manuale Utente

Pagina di 85
66
Connecting to External Output Equipment
Connecting to an External Monitor
Analogue RGB images and RGB video images from a computer that are 
being input to the Computer/Computer1 port can be viewed on an external 
computer monitor at the same time they are being projected by the 
projector, so that the images can be checked at times such as when giving 
presentations.
If the images being projected are from a source that is connected to the 
Computer2 port, these images cannot be output to an external monitor.
Connect the external monitor using the cable that is provided with the 
monitor.
Connecting to an external speaker (when using the 
EMP-82/62)
You can connect speakers with built-in amplifiers to the projector's Audio 
Out port in order to enjoy a fuller quality of sound.
Use a commercially-available audio cable with pin jack 
 stereo mini jack 
(3.5 mm) plugs or similar.
Use an audio cable with plugs that match the ports for the external audio 
equipment.
• Component video, S-Video, and composite video images 
cannot be output to an external monitor.
• The setting gauge for keystone correction and the 
configuration menus and help menus are not output to 
the external monitor.
Cable provided with monitor
To Monitor Out port (black)
Monitor port
When a stereo mini-jack audio cable is inserted into the 
Audio Out port, the sound will be output to external 
speakers. No sound will be output from the projector's 
built-in speaker at this time.
Audio cable
(commercially available)
To Audio Out port
To external audio equipment