Infocus LP 740 Manuale Utente

Please read these instructions carefully before using your LP 740. 
Failure to comply with them could result in fire, electrical shock, 
personal injury or damage to equipment.

These graphics are used throughout this manual to draw your 
attention to important information about the projectors.

 CAUTION: Steps to take to avoid damage to your equipment.

 WARNING: Steps to take to avoid personal injury.

These graphics are used on the projector’s labels.

 Attention - Refer to this User’s Guide for important 

safety information.

 CAUTION-Hot Surfaces - Avoid touching hot surfaces. 

Do not touch until the projector has cooled.

 Do Not Look Into The Lens!

Be extremely careful not to look into the projection lens when the projec-
tor is turned on. The bright light may harm your eyes. Be especially care-
ful to keep children from looking into the lens.

 Power Source

Use only a three-wire grounding type power source. The power source 
should not exceed 250 volts rms between the supply conductors or 
between either conductor and the ground.

 Power Cord

Use only the power cord that was shipped with the projector. Although 
other power cords might be similar in appearance, they have not been 
safety-tested with the projector. Do not use a power cord if it has become 
damaged or frayed. Contact your In Focus dealer or call In Focus if you 
need to replace your power cord.