Acer H5350 Manuale Utente

20

English

User password

•

Press 

 to setup or change the "User Password".

•

Press number keys to set your password on the remote control 
and press "MENU" to confirm. 

•

Press 

 to delete character.

•

Enter the password when you see "Confirm Password" 
displayed.

•

The password should be between 4 and 8 characters long.

•

If you select "Request password only after plugging power 
cord", the projector will prompt the user to enter the 

password every time the power cord is plugged.

•

If you select "Always request password while projector turns 
on", the user has to enter the password every time when the 

projector is turned on.

Administrator Password
The "Administrator Password" can be used in both the "Enter 

Administrator Password" and "Enter Password" dialog boxes.

•

Press 

 to change the "Administrator Password".

•

The factory default of "Administrator Password" is "1234".

If you forgot your administrator password, do the following to 

retrieve the administrator password:

•

An unique 6-digit "Universal Password" which is printed on 
the Security Card (please check accessory in the box). This 

unique password is the number which will be accepted by 

projector anytime no matter what the Administrator 

Password is.

•

If losing this security card and number, please contact with an 
Acer service center.

Disable Power button

•

When "ON" is selected, only the Power Key on the remote 
control can be used. If "OFF" is selected, then the Power Key 

on either the remote control or the control panel can be used 

to control the projector.

Reset

•

Press the button after choosing "Yes" to return the 
parameters on all menus to the factory default settings.