Yamaha LPX-510 Manuale Utente

Maintenance

56

Vertical stripe interference may appear in the projected images at times. If this vertical stripe interference 
impairs image viewing, the images can be adjusted by carrying out the following procedure.

Note the following points when carrying out the procedure below.

••••

Turn on the power and let the projector stand for approximately 10 minutes after the lamp turns on before 
starting the following procedure.

••••

The following adjustment can be carried out more effectively if the room is made dark beforehand.

••••

The adjustment can also be carried out without an image source connected.

••••

If the vertical stripe interference becomes a problem again while using the projector after the adjustment 
has been carried out, you can repeat the adjustment procedure to maintain clear images.

The menu will be displayed.
Select "Setup" - "Operation" - "LCD Panel 
Adjustment".

First select "Vertical Stripe Adjustment R" and 
then press the 

 button on the projector's control 

panel or the 

 on the remote control.

The red tone adjustment screen will be displayed.

Image with vertical stripe interference

Image after adjustment

Image

Sleep Mode

30min.

100

RS-232C Off
Fan

Lamp Power
Standby Mode
Trigger Out
Lock Setting
LCD Panel Adjustment

Setup

Info

Return

[Operation]

Reset

:Enter

:Return

:Select

Image

Vertical Stripe Adjustment R
Vertical Stripe Adjustment G

:Enter

:Return

:Select

Vertical Stripe Adjustment B

Setup

Info

Return

[LCD Panel Adjustment]

Reset