Acer 65PE Manuale Utente

 

The picture will become dark or the color will fade after the lamp 
has been used for a long time. In such cases, continued use of the 
lamp could cause a malfunction. Replace the lamp with a new one. 

1. Lamp in excess of service hours 

When the LED light is a continuous red, it means the lamp has 
exceeded (*1500) service hours. After this light appears, it is 
advisable to replace the projection lamp as soon as possible. 

 

i. 

“CHANGE THE LAMP, AND RESET THE LAMP TIMER” will be displayed on 
the screen if the lamp has been operated for 1200 hours (see 
figure 16).   

ii. 

“CHANGE THE LAMP, THE POWER WILL TURN OFF AFTER 20 HOURS” will 
be displayed on the screen if the lamp has been operated for 
1479 hours. The “20” will count down (see figure 17).   

iii. 

“CHANGE THE LAMP!” will blink on the screen together with a red 
LED if the lamp has been operated for more than (*1500) hours 
(see figure 18). The power will turn off automatically after 10 
minutes. All three of the above messages will not display for 
more than 3 minutes, but each message will be displayed whenever 
you turn on the lamp.