Acer 65PE Manuale Utente

 

Copyright 

Copyright © 2000 by this company. All rights reserved. No part of this publication 
may be reproduced, transmitted, transcribed, stored in a retrieval system or 
translated into any language or computer language, in any form or by any means, 
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without 
the prior written permission of this company. 

 

Disclaimer 

This company makes no representations or warranties, either expressed or implied, 
with respect to the contents hereof and specifically disclaims any warranties, 
merchantability or fitness for any particular purpose.  Further, this company 
reserves the right to revise this publication and to make changes from time to time 
in the contents hereof without obligation of this company to notify any person of 
such revision or changes. 

 

Fill this in!! 

For the convenience of service, record the following 
information in the space below.  The serial number is 
on the back of the product. 

Monitor Information 
Product 
Name: 

7763P/65PE 

Serial 
Number: 

 

Date of 
Purchase: 

 

 

 

Dealer:   

Telephone 

Number: 

Address:  

 

 

 

Caution 

Safety Instructions 

1.  Read all of these instructions before you operate your projector and save for 

future reference. 

2.  The lamp becomes extremely hot during operation.  Allow the projector to cool 

for approximately 45 minutes prior to removing the lamp assembly for 
replacement.  Do not operate lamps beyond the rated lamp life.  Excessive 
operation of lamps beyond rated life could cause them to explode in rare 
occasions. 

3. Power is still available when the projector is in the standby mode.  Never 

replace lamp assembly or any electronic components unless the projector is 
unplugged. 

4.  Do not attempt to service this product yourself, as opening or removing covers 

may damage the components inside and will void your warranty.