Canon WX6000 Manuale Utente

120

[Power management mode]

You can turn off the lamp or projector auto-
matically in order to save power when the 
projector is not in use.

MENU > [System settings] > [Power manage-
ment mode]

MENU > [System settings] > [Power manage-
ment mode]

Press the 

OK button to accept your setting 

and then press the 

MENU button or EXIT 

button (WX6000 / SX6000).

• [Off] is the factory default.
• During standby mode, the [POWER ON] 

indicator and [STAND BY] indicator flash 
alternately.

• You cannot enable the [Direct power on] 

function (see the next item), if you select 
[Off].

HDMI

Component

Digital PC

Analog PC

Off

Disables the power management 
mode.

Standby If no input signal is received for 30 

seconds, the countdown will be dis-
played and after 5 minutes, the 
lamp will turn off.
If it receives an input signal or is 
operated during this period, it 
resumes projection.

Exit

If no input signal is received for 30 
seconds, it displays the countdown 
and turns off the projector after 5 
minutes.