Canon LE-RC01 Manuale Utente
Projecting
32
As the projector does not have a zoom function, adjust the size of the projected image
by changing the projection distance.
by changing the projection distance.
The projector should be placed horizontally on top of a desk, etc. so that the projector
is perpendicular to the center of the screen.
is perpendicular to the center of the screen.
This projector is designed to project at a slightly upward angle above the horizontal
plane of the projector. This is so that they can be readily placed on a table and will
project forward and upwards onto a screen positioned so that the bottom edge of the
screen is above the level of the table.
plane of the projector. This is so that they can be readily placed on a table and will
project forward and upwards onto a screen positioned so that the bottom edge of the
screen is above the level of the table.
Adjusting the size of the image
The size of the image is determined by the projection distance.
The below information shows the relationship between the screen size and the
projection distance.
projection distance.
Positioning the projector
16:10 screen size
Projection distance
Center of lens
Screen
Image size
Projection distance (m)
Screen size (inches) Width (mm)
Height (mm)
20
431
269
0.50
30
646
404
0.75
40
862
538
1.00
50
1077
673
1.25
60
1292
808
1.50
70
1508
942
1.75
80
1723
1077
2.00
90
1939
1212
2.25
100
2154
1346
2.50
120
2585
1615
3.00
150
3231
2019
3.75
200
4308
2692
5.00
240
5169
3231
6.00