Canon LE-RC01 Manuale Utente

Menu function settings

74

•  This function locks the control panel and remote control buttons during standby to 

prevent the projector from being turned on accidentally.

•  You can turn the key lock function on or off from the Setup menu.
•  To turn on the projector when Key Lock is on, press and hold the INPUT button on 

the control panel or the AUTO PC button on the remote control until the STATUS 
LED lights up briefly and the key lock is released. (*1) 

You can then turn on the projector by pressing the POWER button on the control panel 
or the remote control.

* 1: Although the key lock is released, the key lock setting in the menu (On/Off) is not 

changed. If you switch the projector off in this status, you need to release the key 
lock again the next time the projector starts.

•  You can lock the projector's control panel and remote control button operations to 

prevent settings from being changed accidentally during projection.

•  You can enable or disable the key lock function by pressing and holding the 

INPUT button on the control panel or the AUTO PC button on the remote control 
for at least 3 seconds.