Casio XJ-S43W Manuale Utente

Warning messages and indicators let you know what the problem is when a projector error 
occurs.
When an error occurs, wait until cool down is complete and the fan stops before unplugging 
the AC power cord. If you unplug the AC power cord while the fan is still operating, an 
error may occur when you plug the AC power cord back in.
* For further information about items whose reference pages are marked with an asterisk, 

see “User’s Guide (Basic Operation)”.

POWER
TEMP
LAMP

:
:
:

Green steady
–
–

The projector’s internal temperature is very high. Press the [ESC] key 
to clear the warning message and perform the following steps. 
1 Check for any blocking of the projector’s intake vents and exhaust 

vents, and make sure that there is sufficient space around the 
projector. See 

“

Setup Precautions” (page E-13

*).

2 If there is dust accumulated around the intake vents and/or 

exhaust vents, turn off the projector and remove it. See 

“

Cleaning 

the Projector” (page E-22

*).

Message

: Internal temperature is 

too high. Check 
projector air vents for 
blockage.

POWER

TEMP

LAMP

:

:

:

Amber flashing   
Amber steady
Red flashing 
(1-second interval)   
Turns off
–

Power has turned off automatically due to internal overheating. 
Perform the following steps.
1 Check for any blocking of the projector’s intake vents and exhaust 

vents, and make sure that there is sufficient space around the 
projector. See 

“

Setup Precautions” (page E-13

*).

2 If there is dust accumulated around the intake vents and/or 

exhaust vents, remove it. See 

“

Cleaning the Projector” (page 

E-22

*).

If there is no problem with the projector’s vents, confirm that the 
POWER/STANDBY indicator is lit amber (without flashing), and then 
turn power back on again. If the error occurs again when you turn 
power back on, contact your retailer or nearest authorized CASIO 
Service Center.

Message

: Internal temperature is 

too high. The projector 
will turn off.

POWER

TEMP

LAMP

:

:

:

Amber flashing   
Red steady
Red flashing (0.5-second 
interval)
–

Power has turned off automatically due to internal overheating. This 
causes a dialog box containing the text in the next item below to 
appear the next time you turn on the projector. Follow the steps that 
are provided.

Message

: –

POWER
TEMP
LAMP

:
:
:

Green steady
–
–

The last time you were using the projector, power turned off 
automatically due to internal overheating. Press the [ESC] key to 
clear the warning message and perform the following steps.
1 Check for any blocking of the projector’s intake vents and exhaust 

vents, and make sure that there is sufficient space around the 
projector. See 

“

Setup Precautions” (page E-13

*).

2 If there is dust accumulated around the intake vents and/or 

exhaust vents, turn off the projector and remove it. See 

“

Cleaning 

the Projector” (page E-22

*).

3 Disconnect the power cord from the projector and wait for all of 

the projector’s indicators to go out. Next, reconnect the power cord 
and turn the projector back on. If the error occurs again when 
you turn power back on, contact your retailer or nearest authorized 
CASIO Service Center.

Message

: The projector has a 

history of turning off 
due to high temperature. 
Check air vents for 
blockage.