Casio XJ-450 Manuale Utente

Before performing any of the operations in this section, make sure you first set up the 
projector (page 30) and connect to an output device (pages 37 to 40).

z Make sure that you use a power source with the same voltage as that specified for the 

projector.

z Do not share the outlet supplying power to the projector with other devices. If you are 

using an extension cord, make sure that the ampere rating of the extension cord is 
compatible with the power consumption value of this projector.

z Never use the power cord while it is still bundled together.
z Never place objects on top of the power cord and do not step on it.
z Never pull on the power cord. When unplugging it, grasp the plug.
z Use a conveniently located power outlet that you can reach easily when you need to 

unplug the projector.

z If you need more information about the power supply, contact your original dealer or 

authorized CASIO service center.

Use the bundled AC power cord to plug the projector into a power 
outlet.

z Plugging into a power outlet causes the three indicators on the top of the projector to 

light amber. After a short while, two of the indicators will go out and only the POWER/
STANDBY indicator will remain lit amber, which indicates the standby state.

z Note that the projector will not turn on if you press the [

] (power) key while all three 

indicators are lit amber. Wait until the projector is in the standby state before trying to 
turn it on.

Bundled AC power cord

The shape of the plug depends 
on your geographical area.

Power supply connector