Casio XJH2650 Manuale Utente

Restore Menu 
Defaults

R C V H D U N Source 

Specific

Use this sub-menu to return all of the sub-menu items on the Screen 
Settings main menu to their initial default settings.
z Restoring menu defaults when there is no input signal will restore 

defaults for the currently selected input source.

z Note that the “Keystone Correction”, “Projection Mode”, “Ceiling 

Mount”, “Startup Screen”, “No Signal Screen”, and “Blank 
Screen” settings are always returned to their initial defaults, 
regardless of the currently selected input source.

COMPUTER1 
Terminal/
COMPUTER2 
Terminal

R C

N Single

Use this sub-menu to specify manually the type of signal being input 
from the projector’s COMPUTER IN 1/COMPUTER IN 2 terminal.

*:

Automatically detects the signal being input from the COMPUTER 
IN 1/COMPUTER IN 2 terminal and configures the appropriate 
input protocol.

Select this option when a computer is connected to the 
COMPUTER IN 1/COMPUTER IN 2 terminal. For details about 
connecting a computer, see “Connecting the Analog RGB Output 
of a Computer to the Projector” (page 12).

Select this setting when the projector’s COMPUTER IN 1/
COMPUTER IN 2 terminal is connected to the component video 
output terminal of a video device using a commercially available 
component video cable. For information about connection, see 
“Connecting to a Video Device” (page 14).

Note

The setting of this item cannot be changed while the projector 
is in the 3D input mode (“3D Input Mode”, page 17) or “On” is 
selected for the “Option Settings 2 J Interactive Pointer” 
setting.

Video Signal/
S-Video Signal

V

N Single

Use this sub-menu to specify manually the type of signal being input 
from the projector’s VIDEO terminal or S-VIDEO terminal.

*:

Select this setting to have the projector switch the video signal 
system automatically in accordance with the input signal from the 
video device that is connected to the VIDEO terminal or S-VIDEO 
terminal.

Each setting selects the applicable video system. Use these 
settings when you want to specify only one specific video signal 
for the VIDEO terminal or S-VIDEO terminal.