Casio XJH2650 Manuale Utente

The MONITOR OUT terminal of the projector outputs the video signal being input via the COMPUTER 
IN 1 terminal or COMPUTER IN 2 terminal as-is. This makes it possible to simultaneously output the 
projection image to another display.

Note

z The signals output from the MONITOR OUT terminal and speaker (or AUDIO OUT terminal)*

1

 

when the projector is turned on depends on the selected input source as shown in the table 
below.

z The projector can be configured so the input signal from the COMPUTER IN 1 terminal is 

output to MONITOR OUT terminal, while the input signal from the AUDIO IN 1 terminal is 
output to AUDIO OUT terminal, even if the projector is in the standby state. For details, see 
“Standby RGB/Audio” (page 47) under “Option Settings 2 Main Menu”.

Computer 1

COMPUTER IN 1

AUDIO IN 1

Computer 2

COMPUTER IN 2

AUDIO IN 2

S-video

*2

AUDIO IN L/R

Video

*2

AUDIO IN L/R

HDMI

*2

HDMI

USB

*2

USB

*1 Audio is output from either the speaker or AUDIO OUT terminal in accordance with the 

setup menu “Option Settings 2 

J Audio Output” setting.

*2 The video input signal is output from either Computer 1 or Computer 2, in accordance with 

the last selected input source (COMPUTER IN 1 terminal or COMPUTER IN 2 terminal). For 
example, even if the input source is switched from Computer 1 to S-video, the MONITOR 
OUT terminal continues output the video input signal from COMPUTER IN 1.