Summit HL-630 OPC Manuale Utente

 

14

 

the menu. The main display will then show “Non HP 
Toner cartridge”. If the chip is removed, the toner 
low sensors will be disabled, and will not work again 
until a new HP cartridge is installed.  Replacement 
chips are available. 
 

 

Specific 4250 Error Codes

:  

 

“10.32.00”  If it is displayed, it means the printer 
senses this is not an HP original cartridge, and 
declares the cartridge to be “Unauthorized”. This 
does not mean that the chip is faulty, just that it 
is not an actual HP cartridge. 
 

9 This occurs on the 4250 Printer only 

when the cartridge is first installed 

9 Pressing the "Check" button will clear 

the message and allow normal 
printing 

 

 
Like the HP-4200, the HP-4300 uses the second 
generation black toner cartridge ARD’s.  These 
chips (ARD’s) only monitor usage not page counts. 
Each chip also has its own serial number which in 
effect gives the cartridge a serial number. After the 
OEM toner has been used up, the “toner low 
reached” code will be set to YES on the cartridge 
chip. Even after the cartridge is refilled, the printer 
display will still show “Toner Low” for the supplies 
status section of the menu. The main display will 
then show “Non HP Toner cartridge”. If the chip is 
removed, the toner low sensors will be disabled, and 
will not work again until a new HP cartridge is 
installed. Replacement chips are available. 
 
 
 
 

 
 
 
 
 
 
 

The HP-4345MPF uses the second generation black 
toner cartridge They are identical in looks and 
function to the rest of the 4200/4300 series. The 
code however for these cartridges is different from 
the others. New replacement chips are available. 
 

The HP-5200 uses the latest or 3

rd

 generation chip. 

They are very small, and the code is all new. As with 
other HP chips, they control all toner low functions. 
They do not need to be replaced, but if they are not, 
“Unauthorized Cartridge will show on the display. 
New replacement chips are in development.