Lexmark 10N0227 Dépliant

Lexmark 
X72, X74, X75, X1110, X1130, X1150, X1160, X1170, X1180, 
X1185, X2230, X2240, X2250
Z13, Z23, Z25, Z33, Z34, Z35, Z75, Z513, Z515, Z597, Z601, 
Z604, Z605, Z607, Z612,  Z615, Z617, Z713

Instructions
1. 
appropriate colour ink. (fig.2)
2. Remove the top from the black ink bottle and using the 
syringe remove 5ml of the colour ink (fig.3)
3. The lid has to be removed from the cartridge. Cut around 
the edge with a sharp knife and then remove (fig.4)
4. Insert the steel filling tube into the appropriate filling holes. 
(fig.5). Push down into centre of the sponge.
IMPORTANT: Cartridge contains a sponge and a slight 
resistant may be felt.
5. 

 Inject ink. Stop filling before ink overflows as you 

do not want the ink to contaminate the other colours.
6. Repeat steps 4 and 5 with the other 2 colours
7. Blot printer heads with tissue before continuing to fill next 
colour.
IMPORTANT: Clean syringe with water and dry before refilling 
next colour.
8. After refilling replace the lid and stick it down with sellotape
9. Leave the cartridge to stand overnight on non-absorbent 
surface this will ensure no leakage and give the ink time to fully 
saturate the sponge.

10. Install cartridge and run a priming cycle.

PLEASE NOTE: The ink indicator level may need to be turned 
off. Check your HP instructions manual for details.

For more info go to 

Assemble syringe and steel filling tube and fill with 

Items Required
Original Lexmark 27 Cartridge, Syringe & Filling Tube Cyan, 
Magenta & Yellow Ink 5ml, sharp knife, news paper, sellotape

4

9

9

1 

ec

ni

S