Hatco GRAHL Manuale Utente

Form No. GRM-0707

17

Figure 20. Mounting with Chains

Chain supplied by Hatco is constructed of sufficient
strength to securely hold the weight of the unit only
when properly mounted.

1. Securely fasten the chain to the surface above

the desired area. Be sure chain is located so the
unit will be suspended at a safe and proper
distance from walls, counter and food.

2. Loosen but do not remove the screws securing

the mounting tabs on each end of the unit.
Extend the tabs, then tighten the screws
securely. (See Figure 20.)

3. Attach a short piece of connecting chain to each

pair of mounting tabs. (See Figure 20.)

4. Attach overhead chain to the connecting chain

between the two mounting tabs. Repeat for other
end of unit. (See Figure 20.)

Chain Mounting with “S” Hook
Units supplied from Hatco with power cord attached
come with the connecting chain and “S” hook
already attached to the mounting tabs.

1. Securely fasten the chain to the surface above

the desired area. Be sure chain is located so the
unit will be suspended at a safe and proper
distance from walls, counter and food.

2. Attach both “S” hooks to the overhead chains

and ensure the unit is level. (See Figure 20.)

Overhead Chain

Mounting Tabs

Acorn Nuts

Breath Protector

Weld Screws

Connecting Chain

Figure 21. Installing Breath Protectors

PARTS & SE

RVICE

ASSIST

ANCE

WWW.H

ATCOCORP

.COM

1. Remove protective paper from the acrylic

surfaces.

2. Position the acrylic breath protector into the

channel on the warmer with the mounting holes
aligned. (See Figure 21.) 

3. Secure the breath protector using the weld

screws and acorn nuts provided. Tighten weld
screws until snug. Do not overtighten.

“S” Hook