Lexmark X342 Dépliant

The following hints can help you avoid jams:

• Use only recommended print media.
• Do not overload the print media sources. Make 

sure the stack height does not exceed the 
maximum height indicated by the stack line on 
the labels in the sources.

• Do not load wrinkled, creased, damp, or curled 

print media.

• Flex, fan, and straighten print media before you 

load it. If jams do occur with print media, try 
feeding one sheet at a time through the 
multipurpose feeder.

• Do not use print media that you have cut or 

trimmed yourself.

• Do not mix print media sizes, weights, or types 

in the same print media source.

• Make sure the recommended print side is 

loaded in the source according to your simplex 
or duplex needs.

• Keep print media stored in an acceptable 

environment. 

• Do not remove trays during a print job.
• Push all trays in firmly after loading them.
• Make sure the guides in the trays are properly 

positioned for the size of print media you have 
loaded. Make sure the guides are not placed 
too tightly against the stack of print media.

The fuser area is hot. Avoid contact 
with the fuser area to prevent burns.

Press the access button on the left side of the 
MFP, and open the front cover.

Pull on the handle to remove the print cartridge 
assembly.

Do not leave the print cartridge 
assembly exposed to direct light for 
an extended period of time. 
Extended light exposure can cause 
print quality problems.

Remove the jammed paper by gently pulling it 
straight out.

Reinsert the print cartridge assembly.

Close the front cover.

Press Start to resume printing.

The fuser area is hot. Avoid contact 
with the fuser area to prevent burns.

Open the rear cover.