Xerox 75 MX Manuale Utente
Paper and other stock
Operator Guide
5-10
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Pre-printed and
letterhead
letterhead
Common
correspondence,
mailings and
advertising
materials
correspondence,
mailings and
advertising
materials
•
Use ultra-violet cured or
oxidative inks to extend the life
of the Feed Roll Cartridges.
oxidative inks to extend the life
of the Feed Roll Cartridges.
•
Load face up in Trays 1-4.
•
Load face down in Trays 5-6.
Reinforced Mylar
edge
edge
3 or 4 holes
Ringed binders
•
Load reinforced edge on the
right in Trays 1-4.
right in Trays 1-4.
•
Load reinforced edge on the
left in Trays 5-6.
left in Trays 5-6.
•
Use long-edge feed only.
Card stock
Covers, signs
•
Feed from the Bypass Tray for
best results.
best results.
Tabs
Separators within
a document
a document
•
Use the Tab Tray insert. Can
be obtained from your Sales
Representative at no charge.
Part number 98K87320.
be obtained from your Sales
Representative at no charge.
Part number 98K87320.
•
Feed from trays 2, 3, and 4
only.
only.
•
Load with the tabs on the right.
Transparencies
Presentations
•
Use clear or white-striped
transparencies. Do not use
paper-backed transparencies.
transparencies. Do not use
paper-backed transparencies.
•
Feed from the Bypass Tray
(Tray 5) preferred.
(Tray 5) preferred.
•
Refer to the label on the tray
for the orientation of striped
transparencies.
for the orientation of striped
transparencies.
•
When using transparencies
with removable stripes, load
with the stripe up in Tray 5 and
the stripe down in Tray 1.
with removable stripes, load
with the stripe up in Tray 5 and
the stripe down in Tray 1.
•
Do not duplex.
Table 5-6. Recommendations for loading special stock
Stock Type
Common Use
Recommendation