Xerox 701P46985 Manuale Utente

Pagina di 34
 
FREEFLOW PRINT SERVER 6.0.xx 
XEROX FREEFLOW PRINT SERVER 
GETTING READY FOR THE PRINT SERVER INSTALLATION 
 
W-1 data element definitions 
Primary Network Interface:
  
Product Controller/Server 
Value 
iGen3  
PDSI Config 4 
bge0  
DocuColor (2XX, 5000, 
7000/8000) 
PDSi Config 2b, 
2c, 2d 
bge0 
DocuTech 61XX 
DocuPrint 1XX EPS 
PDSi Config 2a 
bge0 
DocuTech 61XX 
DocuPrint 1XX EPS 
SUN W1100z 
Determined 
automatically 
DocuTech 128/155/180 
HLC 
PDSi Config 2a 
bge1 
DocuTech 128/155/180 
HLC 
SUN W1100z 
ce1  
Xerox 41XX/45XX EPS, 
XXP 
SUN Ultra 20 
Determined 
automatically 
Xerox Continuous Feed  PDSi Config 4 
bge1 
Nuvera X86 
Determined 
automatically 
 
DHCP:
 Dynamic Host Configuration Protocol. This is a TCP/IP 
addressing method. If selected, the system should automatically 
contact the DHCP server to obtain the IP address, subnet mask, 
and default gateway address. This information can also be 
manually entered into the FreeFlow Print Server Network 
Configuration screens. 
DHCP is the default for DocuColor 2XX. iGen3 may not use 
DHCP. 
Hostname: 
This is the name the print server will be known as 
by users from other host machines on the TCP/IP network. This 
name is an alias mapped to the IP address that is assigned to 
the print server/host machine. The Hostname must start with an 
alphabetic character, and cannot start with a number, space, or 
any other non-alphabetic character. 
IP Address: 
The lP or Internet Address is a unique 4 byte, 32 
bit numeric value that is assigned to each local host and 
workstation on a TCP/IP network. An IP address consists of four 
fields, each separated by a decimal point. For example: 
13.254.166.111. 
NOTE: The TCP/IP Internet spans the entire world. The Internet 
central committee assigns a set of unique network addresses to