Xerox 701P47301 Manuale Utente
IPDS User Guide
3- 7
Using Xerox FreeFlow® Print Server IPS Manager
IPDS needs to be told what resolution to use for GOCA raster
images. Use the GOCA Image Resolution setting on the IPS
Manager Job Settings tab to specify the desired resolution
(240, 300, 600) for GOCA images. This option only applies to
applications that use raster images within GOCA objects. For
these applications, it is very important that this option be set
correctly. The images print in the wrong size if it is not.
images. Use the GOCA Image Resolution setting on the IPS
Manager Job Settings tab to specify the desired resolution
(240, 300, 600) for GOCA images. This option only applies to
applications that use raster images within GOCA objects. For
these applications, it is very important that this option be set
correctly. The images print in the wrong size if it is not.
•
End of Set Criterion: The End of Set Criterion causes the print
server to end the set at the location indicated by the
associated command. If stapling or other finishing is supported
by your print engine, and has been requested at the main print
server screen, it will be applied on the selected set boundary.
server to end the set at the location indicated by the
associated command. If stapling or other finishing is supported
by your print engine, and has been requested at the main print
server screen, it will be applied on the selected set boundary.
•
Output queue: This option allows you to select the name of the
printer queue to be used to process IPDS jobs. The queue
must be a streaming queue. The IPS Manager prevents the
Xerox FreeFlow® Print Server IPDS gateway from initiating a
host connection until a valid streaming queue is selected.
printer queue to be used to process IPDS jobs. The queue
must be a streaming queue. The IPS Manager prevents the
Xerox FreeFlow® Print Server IPDS gateway from initiating a
host connection until a valid streaming queue is selected.
•
Replicate & Trim: When enabled, this feature allows the printer
to fill large shaded areas by replicating a small section of the
area, as sent by the host. When disabled, the host performs
the replicate and trim operations before sending the entire
image area to the printer. In some cases, the disabled option
improves the appearance of 240 dpi shaded areas when
printed on a 300 dpi printer. The recommended setting should
be enabled.
to fill large shaded areas by replicating a small section of the
area, as sent by the host. When disabled, the host performs
the replicate and trim operations before sending the entire
image area to the printer. In some cases, the disabled option
improves the appearance of 240 dpi shaded areas when
printed on a 300 dpi printer. The recommended setting should
be enabled.
•
Enhanced Font Support: If set to On, the system substitutes
an equivalent available resident font if the host requests a
resident raster font. If the host requests a font for which there
is no resident outline font match or equivalent, the default
resident outline font is used. If set to Off, no font substitution is
made. Requests for fonts that are resident are honored. The
host downloads all other fonts. The default resident outline
font is used only when requested by the host.
an equivalent available resident font if the host requests a
resident raster font. If the host requests a font for which there
is no resident outline font match or equivalent, the default
resident outline font is used. If set to Off, no font substitution is
made. Requests for fonts that are resident are honored. The
host downloads all other fonts. The default resident outline
font is used only when requested by the host.
•
Emulate Continuous Forms: When On, the printer rotates the
IPDS output as though it were to be printed on a continuous
form system. For long-edge fed paper, the rotation is 90
degrees in the counter-clockwise direction. For short-edge fed
paper, the rotation is 90 degrees in the clockwise direction.
IPDS output as though it were to be printed on a continuous
form system. For long-edge fed paper, the rotation is 90
degrees in the counter-clockwise direction. For short-edge fed
paper, the rotation is 90 degrees in the clockwise direction.
If the same application is printed on an IBM® 3800 printer,
which is a continuous form printer, and a Xerox FreeFlow®
Print Server IPS Manager printer, which is a cut sheet printer,
the output may print in the wrong orientation or extend off the
edge of the page. The page orientation of the IBM® 3800
printer is different than most other cut sheet IPDS printers.
which is a continuous form printer, and a Xerox FreeFlow®
Print Server IPS Manager printer, which is a cut sheet printer,
the output may print in the wrong orientation or extend off the
edge of the page. The page orientation of the IBM® 3800
printer is different than most other cut sheet IPDS printers.
•
For Xerox FreeFlow® Print Server IPS Manager printers
and most other cut sheet printers, the origin is at the top
left corner of a portrait page.
and most other cut sheet printers, the origin is at the top
left corner of a portrait page.
•
For IBM® 3800 printers, the origin is at the top left corner
of the leading edge of the paper.
of the leading edge of the paper.