Xerox N2025 Manuale Utente
Duplex Unit
6-36
❖
System Administrator Guide
4
Lift the duplex unit towards you and free its two stubs
from the printer.
from the printer.
5
Remove the duplex unit from the printer.
Be careful not to touch the fuser. It becomes
very hot from printing.
very hot from printing.
6
Reinstall the side cover by (1) lining up the tab,
(2) pushing up, (3) while pushing in, and (4) sliding it
into place.
(2) pushing up, (3) while pushing in, and (4) sliding it
into place.
7
Close the rear cover.
8
Reconnect the printer’s power cord and power on the
printer.
printer.
9
Check the Control Panel display. When the printer has
completed its power on diagnostics, the display should
show
completed its power on diagnostics, the display should
show
Ready
. If an error message is displayed, refer to Table
5.1 on page 5-5 for instructions.
2
1
3
4