Xerox 5252 Manuale Utente
DocuColor 5252 Operator Manual
6-21
Accessories
6
A
cce
cce
ss
o
o
ries
Stacker Tray
Collated sets are transported to the Stacker Tray.
Bypass
The Bypass transports collated sets through the EHCS to a
connected finishing device.
connected finishing device.
Paper Guidelines
•
Stacker Tray will accept 16 - 74 lb. (64 - 280 g/m
2)
- either
coated or uncoated stock with possibility of degraded stock
quality and increased jam rate
quality and increased jam rate
•
Transparencies may be run to either the Top Tray or the Stack
Tray. Stack height should be limited to 100 transparencies.
Tray. Stack height should be limited to 100 transparencies.
•
Coated paper lighter than 27 lb. (100 g/m
2
) may not run as
reliably as coated paper heavier than 27 lb. (100 g/m
2
).
•
Nonstandard papers longer than 305 mm (12 in.) in the feed
direction require 210 mm (8.3in.) minimum measurement
across the feed direction.
direction require 210 mm (8.3in.) minimum measurement
across the feed direction.
•
Nonstandard papers shorter than 254 mm (10 in.) in the cross-
feed direction require 330 mm (13 in.) minimum measurement
in the feed direction.
feed direction require 330 mm (13 in.) minimum measurement
in the feed direction.
Recommended Baseline/Centerline
The following papers are considered to be baseline/centerline and
are recommended to ensure you receive the best quality from
your EHCS:
are recommended to ensure you receive the best quality from
your EHCS:
•
Uncoated: Xerox Digital Color Xpressions +, 24 lb. (90 g/m
2
).
In Europe, Xerox Digital Color Colotech+ 90 g/m
2
.
•
Coated: Xerox Digital Color Gloss Coated Text (120 g/m
2
/80
lbs.) In Europe, Xerox Digital Color Colotech + Gloss Coated
120 g/m
120 g/m
2
.