Xerox 2060 Manuale Utente
Defining the printer to the host: TCP/IP attachment
Installation Planning Guide
F-13
If this parameter is not coded, PSF uses the default name,
TCPIP. (For a full description of the PARM parameter, refer to
Print Services Facility for OS/390 Customization.)
TCPIP. (For a full description of the PARM parameter, refer to
Print Services Facility for OS/390 Customization.)
5. Configure TCP/IP for MVS for the printer
NOTE: The information in this section is for TCP version 3.2 and
3.3. For version 3.4 or later, refer to the appropriate IBM
documentation.
3.3. For version 3.4 or later, refer to the appropriate IBM
documentation.
The TCP/IP Profile dataset contains statements that define the
parameters used by TCP/IP for MVS address space. The
following parameters have special consideration for PSF and the
TCP/IP-attached printers.
parameters used by TCP/IP for MVS address space. The
following parameters have special consideration for PSF and the
TCP/IP-attached printers.
Table F-6. PSF/MVS PRINTDEV statement example
//PRT277 CNTL
//PRT277 PRINTDEV FONTDD=*.FONT01, /* FONT LIBRARY DD */
//PRT277 PRINTDEV FONTDD=*.FONT01, /* FONT LIBRARY DD */
//
OVLYDD=*.OLAY01, /* OVERLAY LIBRARY DD */
//
IPADDR=’13.240.160.97’, /* PRINTER IP ADDRESS */
//
PORTNO=5005 /* PORT NUMBER */
//
PSEGDD=*.PSEG01, /* SEGMENT LIBRARY DD */
//
PDEFDD=*.PDEF01, /* PAGEDEF LIBRARY DD */
//
FDEFDD=*.FDEF01, /* FORMDEF LIBRARY DD */
//
JOBHDR=*.JOBHDR, /* JOB HEADER SEPARATOR OUTPUT */
//
JOBTRLR=*.JOBTLR, /* JOB TRAILER SEPARATOR OUTPUT */
//
DSHDR=*.DSHDR, /* DATA SET HEADER SEPARATOR */
//
MESSAGE=*.MSGDS, /* MESSAGE DATA SET OUTPUT */
//
BUFNO=29, /* NUMBER OF WRITE DATA BUFFERS */
//
PAGEDEF=X06483, /* DEVICE PAGEDEF DEFAULT */
//
FORMDEF=A10111, /* DEVICE FORMDEF DEFAULT @H3C*/
//
CHARS=(GT15, /* DEVICE */
//
GT12,GT18,GT24), /* DEFAULT FONT SET @H3C*/
//
PIMSG= (YES,999), /* ACCUMULATE DATA SET MESSAGES */
//
DATACK=BLOCK, /* BLOCK DATA CHECKS */
//
TRACE=NO /* BUILD INTERNAL TRACE @H3C*/
// PRT277 ENDCNTL