Xerox 2060 Manuale Utente

Defining the printer to the host: TCP/IP attachment

Installation Planning Guide

F-21

This section describes the process of configuring an AS/400 
system to communicate and print using TCP/IP. This process is 
applicable to either a Token Ring or an Ethernet LAN.

This information applies to all AS/400 RISC models with OS/400 
V3R7 (or higher) installed.

The following prerequisite software packages must be installed 
on your host system before you begin the configuration process 
described in the following pages. Ensure that you are using the 
manuals for the proper software releases.

The printer is supported in all the following types of AS/400 
configurations, provided that the software prerequisites are 
installed.

•

Basic configuration in which the AS/400 is attached to a LAN 
using either a Token Ring or Ethernet network adapter card

•

Remote LAN environment in which there are data 
communication links between the AS/400 and the LAN-
attached controller

•

Configurations in which the LAN with the printer attached is 
connected to the host-attached controller using LAN devices 
such as routers.

V3R7

5716TC1

TCP/IP Connectivity Utilities for AS/400

*BASE

V3R7

5716SS1

OS/400—Print Services Facility/400

N/A

V3R2

5763TC11

TCP/IP Connectivity Utilities/400

N/A

V3R2

5763AF1

Advanced Function Printing Utilities/400

N/A