Xerox 2060 Manuale Utente
Defining the printer to the host: TCP/IP attachment
F-24
Installation Planning Guide
3. Create the printer device description – AS/400
Follow these steps to create the device description for the printer.
1. At the AS/400, press <F4> to prompt the CRTDEVPRT
command.
2. Key in the parameter values as indicated in the appropriate
figure below.
•
Table F-16 shows printer description parameters for OS/
400 with V3R7 installed.
400 with V3R7 installed.
•
Table F-17 shows parameters for OS/400 with V3R2
installed.
installed.
For parameters with * beside them, refer to the configuration
worksheet, earlier in this section.
worksheet, earlier in this section.
Table F-16. Create Device Description (Printer) screen for
OS/400 with V3R7 installed
CREATE DEVICE DESC (PRINTER) (CRTDEVPRT)
Type choices, press Enter.
DEVICE DESCRIPTION.........
> XEROXIPS
*
DEVICE CLASS...............
> *LAN
(New to V3R7)
DEVICE TYPE................
> *IPDS
DEVICE MODEL...............
> 0
LAN ATTACHMENT.............
*IP
(New to V3R7)
ADVANCED FUNCTION PRINTING..
*YES
PORT NUMBER................
> 5001
*
ONLINE AT IPL..............
*YES
FONT:
IDENTIFIER...............
IDENTIFIER...............
> 11
POINT SIZE...............
*NONE
FORM FEED..................
*AUTOCUT
SEPARATOR DRAWER...........
*FILE
SEPARATOR PROGRAM..........
*NONE
LIBRARY..................
PRINTER ERROR MESSAGE......
*INQ
MESSAGE QUEUE..............
QSYSOPR
LIBRARY..................
*LIBL