Xerox 2060 Manuale Utente
System overview
Installation Planning Guide
1-7
Channel interface board and channel cable connector box—channel-
attached systems only
attached systems only
The channel interface board, connected to the channel cable
connector box, handles all IPDS communications and
handshaking with PSF on the host when the NPS/IPS is
receiving data over a channel. (It is not used when the NPS/IPS
is printing data using TCP/IP.)
connector box, handles all IPDS communications and
handshaking with PSF on the host when the NPS/IPS is
receiving data over a channel. (It is not used when the NPS/IPS
is printing data using TCP/IP.)
Figure 1-3. Channel interface board and channel cable
connector box
connector box
1. Printer
2. Printer control and video cable
3. Printer controller with channel interface board
4. Channel cable connector box
5. Channel cables
6. Host system
NOTE: The customer is responsible for obtaining, stringing, and
maintenance of the bus and tag cables. The bus and tag cables
must be fully populated cable sets.
maintenance of the bus and tag cables. The bus and tag cables
must be fully populated cable sets.