SATO M-8400RV Manuale Utente
100
SATO RISC Printers
2. Command Codes
Programming Manual
Memory Card Function
Clear Card Memory
Command Structure:
<ESC>*a,bb
a:
a:
Memory card section to be cleared
G To clear SATO graphic files from memory card
P To clear PCX graphic files
F To clear formats from the memory card
O To clear TrueType fonts
G To clear SATO graphic files from memory card
P To clear PCX graphic files
F To clear formats from the memory card
O To clear TrueType fonts
bb:
Memory Card storage area to be cleared
01 to 99 for Graphics, PCX or Formats
00 to 09 for TrueType fonts
01 to 99 for Graphics, PCX or Formats
00 to 09 for TrueType fonts
Example:
<ESC>*G,01
Placement:
This command should be sent to the printer immediately
following the <ESC>CC Slot Select command.
following the <ESC>CC Slot Select command.
Default:
None
Function:
To clear individual memory areas in the Memory Card.
Input:
<ESC>A
<ESC>CC1<ESC>*O,09
<ESC>Z
Output:
There is no printer output as a result of this command.
Note:
1. To clear everything in the memory card, use the <ESC>BJF Mem-
1. To clear everything in the memory card, use the <ESC>BJF Mem-
ory Card Initialize command.
2. This command is ignored if there is no data to be cleared.
3. This command is ignored if a memory card is not installed in the
3. This command is ignored if a memory card is not installed in the
printer.