Citizen Systems 500 Manuale Utente
16
English
Single Sheets and Envelopes (Friction Mode)
Turn the power on and the PAPER OUT indicator will flash indicating that no paper is installed
in the printer.
in the printer.
Adjust the head gap lever for the thickness of paper
that you are using, then set the paper feed selector
to friction mode position.
that you are using, then set the paper feed selector
to friction mode position.
Insert the top cover and raise it to the upright posi-
tion.
tion.
This is done by inserting the side pins of the top
cover into the slots in the upper case.
cover into the slots in the upper case.
Slide the paper support upwards until it stops to provide
additional support for the sheets or paper or envelopes.
additional support for the sheets or paper or envelopes.
Separate the paper guides (1) to the approximate width
of your paper or envelope.
of your paper or envelope.
Insert a sheet of paper (2) through the paper guides.
The paper will be automatically loaded to the first print
line.
line.
If the ON LINE indicator light is not lit, press the ON LINE
key to ensure the printer is ready to print.
key to ensure the printer is ready to print.
To disable the AUTO LOADING option, you will need to use the control panel configuration
system. Please refer to the details later in this manual
system. Please refer to the details later in this manual