Panduit LS8 Manuale Utente

 

5 

 
Because of the danger of introducing additional hazards, do not install 
substitute parts or perform an unauthorized modification to the printer or its 
accessories. The proper components for service and repair may be obtained 
from Panduit Corp. 
 

WARNING:  

When the printer has been in use for an extended period of time, the 
printer motor may become hot. DO NOT touch the printer motor with 
bare hands. 

 

 

NOTE: This printer has been tested and found to comply with the limits for a 
Class A digital device, pursuant to Part 15 of FCC rules.  These limits are 
designed to provide reasonable protection against harmful interference when 
the printer is operated in a commercial environment.  This printer generates, 
uses, and can radiate radio frequency energy and, if not used in accordance 
with this instruction manual, may cause harmful interference to radio 
communications.  Operation of this printer in a residential area is likely to 
cause interference in which case the user will be required to correct the 
interference at his own expense. 

 

 

This digital apparatus does not exceed Class A limits for radio noise 
emissions for digital apparatus set out in the Radio Interference Regulations 
of the Canadian Department of Communications.  

 

Le present appareil numerique n’emet pas de bruits radioelectriques 
depassant les limites applicables aux appareils numeriques de la class A 
prescrites dans le Reglement sur le brouillage radioelectrique edicte par le 
ministere des Communications du Canada. 

 

It is possible that infrequent electrical phenomena (static discharge, power 
line fluctuations) may cause printer function to be temporarily interrupted. In 
this case, the printer will usually reset itself. In extreme cases, the user should 
remove then re-apply power (batteries or AC adapter).