Panduit LS9 Manuale Utente

 5 

 
Because of the danger of introducing additional hazards, do not install substitute 
parts or perform an unauthorized modification to the printer or its accessories. The 
proper components for service and repair may be obtained from Panduit Corp. 
 

WARNING: 

When the printer has been in use for an extended period of time, the printer 
motor may become hot. DO NOT touch the printer motor with bare hands. 

 

 

NOTE: This printer has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of FCC rules.  These limits are designed to 
provide reasonable protection against harmful interference when the printer is 
operated in a commercial environment.  This printer generates, uses, and can 
radiate radio frequency energy and, if not used in accordance with this instruction 
manual, may cause harmful interference to radio communications.  Operation of 
this printer in a residential area is likely to cause interference in which case the 
user will be required to correct the interference at his own expense. 

 

 

This digital apparatus does not exceed Class A limits for radio noise emissions for 
digital apparatus set out in the Radio Interference Regulations of the Canadian 
Department of Communications.  

 

Le present appareil numerique n’emet pas de bruits radioelectriques depassant 
les limites applicables aux appareils numeriques de la class A prescrites dans le 
Reglement sur le brouillage radioelectrique edicte par le ministere des 
Communications du Canada. 

 

It is possible that infrequent electrical phenomena (static discharge, power line 
fluctuations) may cause printer function to be temporarily interrupted. In this case, 
the printer will usually reset itself. In extreme cases, the user should remove then 
re-apply power (batteries or AC adapter).