Panasonic KX-MC6020 Manuale Utente
9. Programmable Features
62
Setting the Error Correction
Mode (ECM)
{#}{
Mode (ECM)
{#}{
4}{1}{3}
This feature is available when the sending / receiving fax machines are ECM
compatible.
{
compatible.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): If there is an error during fax transmission / reception, the
unit will support the communication.
Setting the connecting tone
{#}{
{#}{
4}{1}{6}
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
{
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear connecting tones.
Note:
L
If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
machine or may have run out of paper. Check with the other party.
L
The connecting tone volume cannot be adjusted.
Setting the maximum fax
speed
{#}{
speed
{#}{
4}{1}{8}
{
1} “
14.4Kbps”
{
2} “
33.6Kbps” (default)
Note:
L
The fax speed maybe lower than the selected speed according to your line.
Activating the Distinctive
Ring feature
{#}{
Ring feature
{#}{
4}{3}{0}
{
0} “
OFF” (default)
{
1} “
ON”
See page 55 for details.
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{
(Distinctive Ring feature)
{#}{
4}{3}{1}
{
1} “
A”
{
2} “
B”
{
3} “
C”
{
4} “
D”
{
5} “
B-D” (default)
See page 55 for details.
Setting auto reduction
feature
{#}{
feature
{#}{
4}{3}{2}
To receive a fax document that is longer than your recording paper.
{
{
0} “
OFF”: The unit will print the original size.
{
1} “
ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{
code
{#}{
4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
and program the activation code.
Important:
L
The fax activation code must be different from the code that you
programmed on the answering machine.
programmed on the answering machine.
{
0} “
OFF”
{
1} “
ON” (default)
1. {Menu} i {#}{4}{3}{4}
2. Press {1} to select “
ON”. i {Set}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L
The default code is “;
#9”.
L
Do not enter “0000”.
4. {Set} i {Menu}
Setting the memory reception
alert
{#}{
alert
{#}{
4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{
memory due to some existing problem.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
sure the unit is supplied with enough paper to print the stored document.
Feature/Code
Selection