Epson PRO 3800 Manuale Utente
Epson Stylus Pro 3800
14 - Epson Stylus Pro 3800
12/06
Replacing Ink Cartridges
Before you begin a large print job, you should check your ink
levels. If one of your cartridges is low, you can replace it before
you start. Or you can wait until the ink cartridge needs to be
replaced, and then continue the job without any loss of print
quality. However, it is best to replace a low ink cartridge
before starting a large print job.
levels. If one of your cartridges is low, you can replace it before
you start. Or you can wait until the ink cartridge needs to be
replaced, and then continue the job without any loss of print
quality. However, it is best to replace a low ink cartridge
before starting a large print job.
The easiest way to check ink levels is from the control panel:
When the red B ink light is flashing and
INK LOW
appears on
the LCD panel, the indicated cartridge is low on ink. Make
sure you have a replacement cartridge.
sure you have a replacement cartridge.
When the light stays on and you see the LCD message
REPLACE INK CARTRIDGE
, the cartridge is expended. You
must replace the cartridge before you can continue printing.
Use the following UltraChromeK3
TM
Epson ink cartridges:
You can purchase genuine Epson ink and paper from an
authorized Epson reseller. To find the nearest reseller, call
800-GO-EPSON (800-463-7766). Or you can purchase
online at www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
authorized Epson reseller. To find the nearest reseller, call
800-GO-EPSON (800-463-7766). Or you can purchase
online at www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
Before you start, make sure the printer is turned on. Then
follow these steps to replace an ink cartridge:
follow these steps to replace an ink cartridge:
1. Note the color of the cartridge whose icon and abbreviation
is on or flashing. This is the cartridge you need to replace.
Caution: Leave the low or expended cartridge in the printer until
you are ready to replace it. To prevent ink reporting errors, never
replace the ink cartridges with the printer turned off.
you are ready to replace it. To prevent ink reporting errors, never
replace the ink cartridges with the printer turned off.
2. If the red B ink light is on and
REPLACE INK CARTRIDGE
appears on the printer’s LCD, press the u Ink cover open
button to unlock the ink cover. If the light is flashing and
the LCD message is
button to unlock the ink cover. If the light is flashing and
the LCD message is
INK LOW
, you need to hold down the
button for 3 seconds to unlock the ink cover.
3. Lift the ink cover.
4. Press the ink eject button above the cartridge you need to
replace. The ink cartridge slides out slightly.
Cartridge
Product code
Photo Black
T580100
Cyan
T580200
Magenta
T580300
Yellow
T580400
Light Cyan
T580500
Light Magenta
T580600
Light Black
T580700
Matte Black
T580800
Light Light Black
T580900
1 Matte Black
3 Light Black
2 Photo Black
4 Light Light Black
7 Light Cyan
9 Yellow
5 Cyan
8 Light Magenta
6 Magenta