Epson EPL-N1200 Manuale Utente
Using SelecType
The SelecType button accesses a series of menus and options
that are shown on the control panel display. Although you can
set some of the SelecType options through your driver
software, you need to use the printer’s control panel to access
functions like the following:
that are shown on the control panel display. Although you can
set some of the SelecType options through your driver
software, you need to use the printer’s control panel to access
functions like the following:
❑
Checking the amount of toner remaining
❑
Changing the memory buffer size
❑
Configuring interface channels
❑
Changing emulation modes
Changing SelecType Settings
You can look at your current SelecType settings by printing a
status sheet. To do this, wait until the printer warms up
(Ready appears on the control panel display and the On Line
light is on); then press the Enter button twice.
status sheet. To do this, wait until the printer warms up
(Ready appears on the control panel display and the On Line
light is on); then press the Enter button twice.
Note:
Some application programs may send commands to your printer that
override SelecType settings. If you do not get the results you expect
from SelecType, check your application software settings to see if they
affect your output.
Some application programs may send commands to your printer that
override SelecType settings. If you do not get the results you expect
from SelecType, check your application software settings to see if they
affect your output.
Using the Control Panel
3-7